Title The History of Salt Production in Japan

  • Ishikawa
Topic(s):
Historic Sites/Castle Ruins Cuisine/Food Culture
Medium/Media of Use:
$SETTINGS_DB.mediaClassificationMap.get($item)
Text Length:
251-500
FY Prepared:
2022
Associated Tourism Board:
ippanshadanhojin notohanto koikikankokyokai

日本における塩作りの歴史


塩は、数千年にわたって、調味料・保存料として使われてきました。季節によって異なる食料の入手可能性に対する依存を減らし、食料の長距離輸送を可能にしたのです。塩は、岩塩 (塩化ナトリウム鉱物岩塩) または海水からとれます。一部の国には、地下に岩塩の大きな鉱床があります。また、一部の国には塩湖があります。塩湖とは、かつては海につながっていた水域が陸地に囲まれるようになり、その大部分が蒸発して、湖面に塩の堆積物が残された湖です。 


藻塩焼

日本は四方を海に囲まれています。日本が塩を入手できる唯一の源は海です。食卓塩は、40パーセント近くが塩化ナトリウムです。しかし、海水中の塩化ナトリウムの濃度は、わずか3.5パーセントです。少量の塩を作るのにも、大量の海水が必要です。2,000年以上前、日本での塩作りの主な方法は、「藻塩焼」でした。海藻を、表面に塩の結晶ができるまで乾燥させました。この塩の結晶を集め、さらに海水に溶かして濃い塩水を作り、この塩水を土器で煮詰めました。この方法は、8世紀まで一般的でした。


揚げ浜

能登半島で今なお行われている「揚げ浜」での塩作りは、13世紀ころに始まりました。海から水を運び、砂に覆われた土地に撒いて、蒸発させます。できた塩の結晶を海水に溶かして、濃い塩水を作ります。これを、塩の厚い層が塩水の表面にできるまで煮詰めます。この工程は、日光により海水を蒸発させます。このため、塩が作れるのは晴れの日に限られます。


入り浜

海の干満の差が充分に大きい地域では、塩田は海の近くに作られ、潮水を塩田に入れられる水路がありました。この方法は「入り浜」と呼ばれ、江戸時代 (1603~1867年) に一般的になりました。現在も、西日本の瀬戸内海周辺で行われています。この工程は、日光により海水を蒸発させます。このため、塩が作れるのは晴れの日に限られます。


電気透析

21世紀には、肉体労働の量と日光の必要量を減らすため、様々な蒸発方法が試みられています。現在、最も一般的な方法は、イオン交換膜電気透析です。この方法は、電気を使って、塩化ナトリウム粒子を海水から分離し、濃い塩水を作ります。この濃い塩水を蒸発させて塩を集めます。残った海水は海に戻します。  

The History of Salt Production in Japan


Salt has been used for thousands of years as a seasoning and a preservative, reducing dependency on the seasonal availability of foods, and making it possible to transport them over long distances. Salt comes from rock salt (the sodium chloride mineral halite), or seawater. Some countries have large underground deposits of rock salt, and some countries have salt lakes—landlocked bodies of water that were once connected to the ocean, which have largely evaporated, leaving salt deposits on the lake’s surface. 


Moshio-yaki

Japan is surrounded on all sides by the sea, which is its only available source of salt. Table salt is close to 40 percent sodium chloride, but seawater has a concentration of just 3.5 percent. It takes a large volume of seawater to produce a small amount of salt. Over two thousand years ago, the main method of salt-making in Japan was moshio-yaki. Seaweed was dried until salt crystals formed on the surface of the fronds. The salt crystals were harvested and dissolved in more seawater to create a concentrated brine, which was boiled down in earthenware pots. This method was common until the eighth century.


Agehama

Agehama salt production, which is still practiced along the Noto Peninsula, began around the thirteenth century. Water is carried from the sea and sprinkled over sand-covered fields, where it is left to evaporate. The resulting salt crystals are dissolved in seawater to create a concentrated brine, which is boiled down until a thick layer of salt forms over the surface of the remaining brine. The process relies on sunlight to evaporate the seawater, limiting production to sunny days.


Irihama

In areas with a sufficiently large tidal range, salt fields were created close to the sea, with channels to allow the tidewaters to flood the fields. This method, called irihama, became common in the Edo period (1603–1867) and is still practiced around the Seto Inland Sea in western Japan. The process relies on sunlight to evaporate the seawater, limiting production to sunny days.


Electrodialysis

In the twenty-first century, various evaporation methods have been tried to reduce the amount of manual labor and the need for sunlight. Now, the most common method is ion-exchange membrane electrodialysis, which uses electricity to separate the sodium chloride particles from seawater to produce a concentrated salt solution. The concentrate is evaporated to collect salt, and the remaining seawater is returned to the sea.  

Search